Miller Millermatic 350P Bedienungshandbuch PDF herunterladen (Seite 39)

OM-1327 Page 35

5-6. Setting Hot Start (Aluminum Pulse Only) Parameters

To access the Setup Feature Menu, press

both SETUP (1) and ARC CONTROL (2)

buttons at the same time.

Left display will initially show arc hours.

Rotate left knob (3) until ALST appears in

the left display.

Rotate right knob (4) to select hot start

mode as follows:

Auto − default setting for preset hot start

parameters

Off − hot start is inactive

On − allows customized setting of hot start

parameters

Manual Hot Start Mode

When ALST appears in the left display and

On appears in the right display, the welding

power source is set for manual hot start

mode.

To access hot start parameters, press the

SETUP (1) button until SPWR appears in

the left display.

SPWR − Start Power

Range for start power is 100-250 as a per-

cent of wire feed speed.

. SPWR maximum setting will de-

pend on set wire feed speed and may

not allow a setting of 250 under certain

conditions.

STMR − Start Time

Time range is 0.0-0.5 seconds for hot start

to be on.

STRL − Start Arc Length

Range for start arc length is 0-99 that

changes arc length from shorter to longer.

RMPT − Ramp Time

Time range is 0.1-5.0 for the time it takes to

go from hot start to set wire feed speed.

. The two parameters that will have

the largest influence on hot start are

Start Power and Start Time. These two

parameters will determine how much

heat is provided and for how long at the

beginning of the weld.

To exit this menu, press the SETUP (1)

button.

Ref. 213 935-A

. The factory default setting for Hot Start is “Auto” on 350P models. The Auto setting

has preset parameters. Hot Start can also be set to “On” (manual) for customized settings

or made inactive when set to Off.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

Miller Millermatic 350P Bedienungshandbuch Seite 39

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schweißsystem Miller Millermatic 350P